* Features & Benefit
- Integrated HF RFID reader
- Integrated 1D laser / 2D Imager (HD optional) and 3MP auto focus camera
- Integrated G-sensor
- 1.8m drop tolerance, IP65 sealing and MIL-STD 810F
- 3.5G GSM / HSDPA and GPS (AGPS and DGPS)
- Windows Mobile 6.1, Widnows Mobile 6.5(optional) or Android 2.3(optional)
- Numeric or QWERTY backlit keypad
* Specifications
Physical Characteristics
Dimensions (W x H x D) |
80 x 160 x 35.5 mm / 3.1 x 6.9 x 1.4 inch |
Weight |
Excluding battery: 292g / Including battery: 407g |
Display |
3.5" VGA with backlight, TFT TouchWindow LCD, 260K, 480 x 640
3.5" QVGA with backlight, TFT TouchWindow LCD, 260K, 240 x 320 |
Keypad |
29-key Numeric / 50-key QWERTY |
Standard Battery |
Rechargeable, 3.7V, 4,400mAh, Li-ion Smart Battery |
Extended Battery
(optional) |
Rechargeable, 3.7V, 5.200 mAh, Li-Ion Smart Battery |
Expansion Slot |
Customer-accessible MicroSD slot for removable memory card up to 32G |
SIM/SAM Slot |
1SIM / 1SAM |
Audio |
High Volume speakers, Headset jack |
Camera |
3 megapixel autofocus camera with LED flash / Ultra bright LED flash (optional) |
GPS |
Integrated GPS with AGPS & DGPS (DGPS compatible with Windows Mobile) |
G-sensor |
Integrated G-sensor |
Performance Characteristics
CPU |
PXA 320, 806MHz |
OS |
Windows Mobile 6.1 / Windows Mobile 6.5 (optional) / Android (optional) |
Memory |
256MB RAM / 512MB ROM (up to 1GB) |
Interface |
RS-232C, USB 2.0 (full-speed) Host & Client, Ethernet via cradle |
User Environment Characteristics
Operating Temp |
-30℃ to 60℃ / -22℉ to 140℉, MIL-STD 810F, Method 501.4, Procedure II, Method 502.4, Procedure I,II&III |
Storage Temp |
-40℃ to 70℃ / -40℉ to 158℉, MIL-STD 810F, Method 501.4, Procedure I, Method 502.4, Procedure I,II&III |
Temp Shock |
MIL-STD 810F, Method 503.4, Procedure I (-35℃/65℃) |
Humiditiy |
95% non-condensing; meets and exceeds MIL-STD 810F, Method 507.4, 90%RH temp cycle 0°C/70°C |
Drop |
6ft. / 1.8m drop to steel surface, 2 drops per 6 sides; meets and exceeds MIL-STD 810F |
Sand and Dust |
IP65, MIL-STD 810F, Method 510.4, Procedures I&II, KWF-test certified |
Water |
IP65, MIL-STD 810F, Method 516.5, Procedure IV, KWF-test certified |
Vibration |
MIL-STD 810F, Method 514.5, Procedure I&II |
Altitude |
MIL-STD 810F, Method 500.4, Procedure I,II&III, 15,000 ft at 23℃/73℉ |
Integrated Radio
WWAN Radio |
GSM/GPRS/eGPRS(850, 900, 1800, 1900MHz)/UMTS/HSDPA(850, 1900, 2100MHz) |
WLAN Radio |
IEEE 802.11b/g, IEEE 802.11a/b/g (optional) |
WPAN Radio |
Bluetooth V2.1+EDR,ClassⅡ, IrDA 1.2 |
Data Capture
Barcode Reader |
1D&PDF417 Laser Class II or 1D/2D CMOS Imager (HD optional) |
RFID Reader |
Integrated RFID, ISO 14443 A/B (MIFARE, Calypso), ISO 15693 |
|
BIP-6000MaxID
(RFID Reader & Pistol Grip) |
BIP-6000MaxGrip
(Pistol Grip Only) |
Dimensions (W x H x D) |
86 x 186 x 152 mm / 3.3 x 7.3 x 5.9 inch |
86 x 160 x 152 mm / 3.3 x 6.2 x 5.9 inch |
Weight |
Excluding battery: 497g / Including battery: 612g |
Excluding battery: 372g / Including battery: 487g |
RFID Reader |
UHF |
LF |
- |
FREQUENCY |
840MHz to 960MHz |
125 kHz & 134.2 kHz |
- |
PROTOCOL |
EPC C1G2, ISO 18000-6C, ISO 18000-6B |
ISO 11784, ISO 11785, ISO 18000-2 |
- |
READ RANGE |
Up to 236.2 inch / 6 m |
Up to 6.3 inch / 14 cm |
- |
* Accessories
Cables and Adapters
|
Adapter
The 5V 3A adapter is for power supply. |
|
Plug Adapter
The plug adapter connects to an adapter. Country-specific plug adapters are provided. |
|
USB Cable
This USB cable supports data transfer. |
Stylus and Other Accessories
|
Protection Film
This hard coating protection film safeguards and prevents any scratches on your LCD display. |
|
Stylus Pen
The stylus pen provides precise touch and control. |
|
Tether
The tether connects a stylus pen to your handheld mobile device. |
|
Snap-on (Optional) |
Chargers and Cradles
|
Battery
This is a rechargeable 4,400mAh battery (standard). |
|
Cradle
This single slot USB desktop cradle charges the BIP-6000 and a spare battery. |
|